Industry Application · Mine Backfilling
Paste backfilling is a core process for the construction of green mines: after tailings are thickened and pulped, they are transported into goafs through pumping pipe galleries. The whole process involves three key parameters: concentration, interface and level. Inaccurate measurement at any link will directly affect the backfill strength, system stability and safety.
Why Paste Backfilling Measurements Are Inaccurate
The backfilling process has a long chain and harsh working conditions. Traditional manual sampling and off-line laboratory testing have obvious shortcomings:
Integrated On-line Monitoring Solution
From the total tailings delivered by the processing plant through thickening, sand silo, batching, mixing and backfilling, three quantities need to be accurately measured along this line: concentration, interface and level, to realize online data acquisition, real-time output and remote monitoring.

膏体充填典型工艺流程与监测点位(示意)
|
|
|
|
|
|
|
|
Non-contact measurement of feed tailings, underflow and outlet concentration.
Na-22 Exempt Source Non-contact clamp-on type Accuracy ±1% No pipe cutting or rerouting required

JYDT-S300/L500 Slurry Concentration Meter & IPB-1K Slurry Concentration Meter
Built-in Na-22 exempt source approved by the Ministry of Ecology and Environment (activity < 27 μCi). It adopts non-contact clamp-on installation without pipe cutting or rerouting. With a measurement accuracy of ±1%, it is widely used for online concentration monitoring in the whole process of grinding, separation, classification, thickening and tailings backfilling in mines.
▍Exempt Source Management:Activity below 27 μCi falls under the exempt scope of the Ministry of Ecology and Environment, simplifying on-site formalities.

On-site: Clamp-on mounting, signal acquisition from outside the pipe.
Online Interface Monitoring for Silo / Thickener
Clear stratification visualizationContinuous online monitoring
It continuously measures and analyzes fluid data at different depths inside settling tanks and thickeners, outputs the interface heights and data trend curves of the clarified layer, settling layer and sludge layer. It is specially designed for interface monitoring of mineral processing thickeners and backfill sand silos.
▍Directly for backfill sand silos: sludge layer status is visible, and rake bogging risks are detected in advance.

在线实测、剖面可视化
140 GHz FMCW波束角 2°精度 ±3mm防尘防结晶隔离罩
140 GHz millimeter-wave radar with a lens antenna features a beam angle of only 2° and measurement accuracy of ±3 mm. Equipped with a dustproof and anti-crystallization isolation hood, it is specially designed to solve inaccurate level measurement caused by slurry splashing, adhesion and coating in backfilling mixing tanks.
▍Block material buildup outside: The isolation hood separates slurry splashing, reduces dust adhesion and prevents false signal interference.

On-site: High-frequency Radar Level Meter with Isolation Hood
3D Scanning Imaging for LevelVolume & WeightAI Point Cloud Scanning

JYR3D-RBT-C 3D Radar Scanning Robot

Intelligent Warehouse Management System: Centralized project management and 3D imaging data information
3D imaging for intelligent inventory checking 3D scanning and imaging for silos, real-time output of level, volume, weight and material distribution to realize intelligent silo inventory management.
PART 05
About Jinde
Beijing Jinde Chuangye Measurement & Control Technology Co., Ltd. (including Hebei Jinde Chuangye Intelligent Equipment Co., Ltd.) is a high-tech enterprise specializing in the R&D, production and sales of automated and intelligent instruments and smart equipment. We focus on eco-friendly concentration/density meters, high-end level instruments and intelligent inventory systems. Meanwhile, we provide turnkey solutions for mine AI safety management and early warning systems as well as intelligent monitoring systems.
The company has established partnerships with China Energy Investment Corporation, China National Coal Group, China Minmetals Corporation, China Nonferrous Mining Group, COFCO Group, China Baowu Steel Group and other enterprises. Our products and services are exported to more than 20 countries and regions worldwide.